arduino 1.8.9 NUCLEO-64 ST-LINK upload

Post Reply
frankz
Posts: 29
Joined: Wed May 01, 2019 7:09 am
Location: Italy
OS: linux
IDE: IDE arduino. Vs Code w/ plaformio
Core: stm official, roger's
Board: nucleo-64-stm32f103rb, Bluepill, maple mini

arduino 1.8.9 NUCLEO-64 ST-LINK upload

Post by frankz » Tue Jun 25, 2019 4:51 pm

I updated stm32 core boards to version 1.6.
The ST-LINK upload method for the NUCLEO-64 STM32f103RB card I am using has disappeared, while in version 1.5 it was present.
How should I upload now?

User avatar
Vassilis
Posts: 165
Joined: Wed Feb 27, 2019 5:09 pm
Answers: 2
Location: Thessaloniki, Greece
OS: Linux, Win10, MacOS
IDE: Arduino 1.8.9
Core: Roger, STM official
Board: Bluepill, Maple mini, STM32F4xx
Contact:

Re: arduino 1.8.9 NUCLEO-64 ST-LINK upload

Post by Vassilis » Tue Jun 25, 2019 6:23 pm

You have to install the STM32CubeProg
-Vassilis Serasidis

TFTLCDCyg
Posts: 4
Joined: Tue Mar 05, 2019 2:56 pm
Location: México
OS: Windows 8.1 Pro
IDE: 1.8.7, 1.8.9
Core: Generic Danieleff, STM Official 1.6.1
Board: Nucleo F767, M4-DEMO, F429ZI-DISCO

Re: arduino 1.8.9 NUCLEO-64 ST-LINK upload

Post by TFTLCDCyg » Thu Aug 29, 2019 8:23 pm

The nucleo boards (64 and 144) come with a STlink V2, connected to the user USB port.
Upload method: Mass Storage

Nucleo F767 (nucleo 144) + TFT NHD-FT813 5"
Image

Image

Image
FT81xmania team

Post Reply